To be used in conjunction with Aithon AL20X only.
Aithon F4X produces a matt finish.
Spreading rates:
- For external timber – 2 coats at 83.4m² per 5kg per coat. So 5kg is needed per 41.7m² of timber.
- For internal timber (decorative finish) – 1 coat at 83.4m² per 5kg
It can be tinted to any RAL or BS colour code. – This process can take up to 3 working days. Please contact us if this is required.
Application Conditions:
Please ensure that the product is applied and dried in conditions that are warmer than 5°C and that ambient humidity is lower than 70%.
The moisture content of the timber should be checked and must be below 12% before application of the AL20X.
The AL20X basecoat must be completely dry before applying the F4X topseal with the moisture content being checked again and below 12% before application of the F4X topseal.
Application Instructions
FOR FULL INSTRUCTIONS PLEASE ENQUIRE ON 01752 690997 OR SALES@FIREPROOFPAINT.CO.UK
AL20X and F4X can be applied by brush, roller or a spray gun.
Stir the products thoroughly before application.
Clean tools with water and natural detergent.
IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:
The information displayed about the products on this website is to be used for guidance ONLY, we advise that all customer contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.
Products purchased directly from our website without specification will NOT qualify for certification.
Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.