Application Conditions:
Ensure that:
The air and steel temperatures are above 5ºC and below 25ºC.
The relative humidity does not exceed 80%. Humidity levels below 65% being are ideal for drying.
The product is touch dry within 2 – 4 hours and hard dry at 4 hours after application if relative humidity is below 65%.
Where the humidity is high and/or the temperature is low, the drying times will be extended.
Application Instructions:
Coverage is typically over 7.4m² per litre. Whist a single full coat is generally sufficient, certain colours may need an additional coat to give acceptable opacity.
Stir only if necessary and reseal container when not in use. Do not thin the product.
To ensure the correct thickness is applied in a uniform manner, a wet film gauge should be used.
We recommend application by spray equipment.
Clean spray equipment with clean water after use.
IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:
The information displayed about the products on this website is to be used for guidance ONLY, we advise that all customer contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.
Products purchased directly from our website without specification will NOT qualify for certification.
Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.
FAST SHIPPING
Next day delivery available
peace of mind
14 day returns policy
price match
Call for the best prices
01752 690997
Speak to our experts