Sherwin-Williams Acrolon C137V2 Topcoat

Sherwin-Williams Acrolon C137V2 Topcoat is a high performance quick drying acrylic urethane gloss finish.

It can be used over the entire Firetex range of intumescent paints. We recommend using it over the appropriate intumescent paints for C3 & C4 environments, to provide long term exterior gloss and colour retention.

For example: FX1003, FX2003 and FX5090 (C3 only).

Applicaton Guidance

We recommend applying this product by brush, short pile roller, or airless sprayer.

You may thin this product with Sherwin-Williams Thinner no. 15.

Clean C137V2 topcoat using Sherwin-Williams Thinner no. 5.

The average drying times are:

*Please note air movement and humidity also impact drying times.

Do not use below 10°C.

Use within 12 months of manufacture.

More detailed application instructions for each application method can be found in the product data sheet in the data sheets tab above.

The product comes standard as white unless a RAL colour is specified at checkout.

Please contact us if you require this topcoat in a 20L drum.

IMPORTANT INFORMATION ON PURCHASING OF PASSIVE FIRE PROTECTION PRODUCTS NOTICE:

The information displayed about the products on this website is to be used for guidance ONLY. We advise that all customers contact our technical department to obtain a free no obligation specification and quotation before purchasing goods directly from the website.

Products purchased directly from our website without specification will NOT qualify for certification.

Please be aware that any negligence caused by failure to obtain the relevant advice, or availment of our specification and estimation service, will absolve International Passive Fire Ltd from any liability should Passive Fire Protection Products prepared, or used, by the purchaser, or any other parties, result in damage to property or human life, or for any monetary costs incurred due to incorrect usage.